Bulk Ultrasonic Water Meter

Bulk Ultrasonic Water Meter DN50-DN400

The S8 bulk ultrasonic water meter is the modern solution for large-volume metering in the utility, industrial and commercial sectors, especially used in agricultural irrigation with a very low pressure loss at the same time.

All components are IP68 so that the water meter can work in any harsh environment.

Its extremely low starting flow rate, its wide measuring range and the absence of moving parts allow the accounting of the entire consumption, making it easier to identify leaks.

Applications: Utilities, Waterworks, Industrial and Agricultural

Available Sizes: DN50-DN400

Transmission Method: RS485 communication, Pulse output, GPRS, NB-IOT, and other data transmission methods.


Reduce Non-revenue Water（RNW）	No Moving Parts, Accurate Measurement	AMR Ready (wired & wireless)	Robust Design
S8 offers up to R400 measuring range ratio (Q3/Q1) which is far better than a standard mechanical water meter, A smaller water flow rate can be measured to help the utility collect every drop of water without any waste. It brings value to the utility by significantly incrementing water bill collection.	The S8 water meter has no moving components to avoid measurement inaccuracies and meter failures caused by long-term wear of mechanical components. This design is also resistant to impurities, thus eliminating inspection and maintenance costs.	S8 support multiple communication interfaces both wired and wireless which are suitable for any type of installation environment, e.g. M-Bus, RS485 (Modbus), Pulse, LoRa/ LoRaWAN, NB, etc. With communication interfaces meter is easily integrated into Automatic Meter Reading (AMR), which provides a reliable and scalable network to utility and brings down the meter reading cost for any application.	S8 presents IP68 as fully waterproof, and its body is fabricated from durable cast iron material and cast steel material. This robust design makes the S8 have excellent long-term stability and reliability and adapts to various harsh installation environments.

Specifications

Model	Nominal Diameter		Nominal Flow Rate	Transitional Flow Rate	Minimum Flow Rate	Length L	Width W	Hight H	Flange Connection
Model	(mm)		Q3 (m³/h)	Q2 (m³/h)	Q1 (m³/h)	Length L	Width W	Hight H	Flange Connection
DN50	50	2 Inch	40	0.16	0.1	200	170	215	170	121.5	4—M19
DN65	65	2.5 Inch	63	0.256	0.16	200	185	220	185	139.5	4—M19
DN80	80	3 Inch	63	0.4	0.252	225	200	235	200	152.5	4—M19
DN100	100	4 Inch	100	0.64	0.4	250	220	255	220	190.5	8—M19
DN125	125	5 Inch	160	1.024	0.64	250	250	285	250	216.5	8—M22
DN150	150	6 Inch	250	1.6	1	300	285	335	285	241.5	8—M22
DN200	200	8 Inch	400	2.56	1.6	350	340	405	340	298.5	8—M22
DN250	250	10 Inch	630	4.03	2.52	450	405	470	405	362.5	12-M25
DN300	300	12 Inch	1000	6.4	4	500	460	525	460	432	12-M25
DN400	400	14 Inch	1600	10.24	6.4	600	580	650	580	525	16-M27
Accuracy class		Class B
Measuring range		R160-R400(customizable)
Temperature class		T30
Temperature range		Ambient temperature: 5~55 ℃ Storage temperature: -20~60 ℃
Protection Class		IP68
Battery life		＞ 8years
Installation position		360 degree
Display		LCD, 8 digits + additional characters
Standard Compliance		ISO9001；ISO14001；ISO45001；ISO4064